Welcome To Our Company Online Store – MiCWL Audio Inc. Original MiCWL CA Series PX8000. 2 Channel Professional Digital Power Amplifier. Bridging Power (Mono Channel mode). 19 1U Professional Power Amplifier Design. Brand New – Original Packaging. MICWL PX8000 Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The PX8000 awesome performance. Flexibility and crystal clear sound quality. (90V-240V universal version 4 Power Versions options). MiCWL PX8000 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference. Hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz) RMS: 2x650W / 2x850W/ 2x1000W / 2x1400W/ 2x2000W / 2x2300W…. Output/Output (4? , 1kHz) PEAK: 2x1300W / 2x1600W/2x1800W/ 2x2100W / 2x2300W…. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2 3-4): XLR input connector; Output (CH1-2 3-4): SPEAKON output; Power: AC power Input (CH1-2 3-4): XLR Input. Connector; Output (CH1-2 3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red). Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. If your speaker is no more than 650 watts, this amplifier is enough to drive. (4 Channel can Drive 4 Unit 650W Speakers). If your speaker is no more than 850 watts, this amplifier is enough to drive. (2 Channel can Drive 2Unit 850W Speakers). If your speaker is no more than 2300 watts, this amplifier is enough to drive. (2 Channel can Drive 2 Unit 2300W Speakers). 1x 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
Tags: 4ohm, 8000w, 8ohms, amplifier, audio, digital, drive, high, micwl, output, power
In: