Everything in the photos is what you will be receiving, If not, will not be included. Great AMP for your needed. 5- After 30 days is FINAL.
No PO boxes and no UPS. This amp was blowing the main fuse. I removed the suspected module and ran it up. Slowly with the other module in place and it seemed to. I gave up on the project, because the amp was in very. Cosmetic condition and couldn’t justify the time and possible. One X-istor got lost. No signs of any damage to either driver board. The bad board appears to have been repaired in the mid 90s. The actual age of the amp, I think is 40 years old. This is for the modules only and not the entire amp. Packaged to arrive safely. All items are thoroughly inspected and any defects will be clearly noted.
THIS LISTING IS FOR THE FOLLOWING ITEM. POWER AMPLIFIER QSC MX1500. THIS POWERS ON AND THE FANS RUN. BUT THIS WAS NOT TESTED, I DON’T KNOW HOW TO TEST. WE JUST BOUGHT A LARGE COLLECTION OF VINTAGE EQUIPMENT. THIS IS VERY HEAVY – 50 POUNDS! MEASURES 18 X 18 X 4. WE DO NOT SELL illegal bootleg tapes, copies, screeners, or any type of illegally burned CD’s! The movies and games we sell are original and ALWAYS GUARANTEED TO WORK! Track Page Views With. Auctiva’s FREE Counter.
Pay less for your Genuine AutoTech needs. Bogen TPU-100B Power Amplifier Stereo Receivers Audio Mixer Audio Receiver Amp. Wiring harnesses, GPS Antennas & VIN locking protection are just a few factors that may prevent you from upgrading certain types of radios in your vehicle. You are 100% responsible for making sure you will be able to make an upgrade. The unit is never used and is in excellent condition. This includes showing sign of any use. Optimize Your Spending Upgrade your Drive!
In good used working condition. Recently pulled from a clients home because they are upgrading systems. Some minor cosmetic flaws & small dent as shown in the photos, but it doesn’t affect its functionality. Comes with power cord.
Excellent condition Schiit Vidar 1, made in USA. No real discernible scratches or marks. Used sparingly in ventilated rack in a 3rd stereo setup. Warm and smooth sound with plenty of power–100 watts into 8 ohms. If you’re reading this, you know the value and quality this brand brings.
Proceed Amp 2 Stereo Power Amplifier Madrigal Audio Laboratories/Mark Levinson as pictured. Item will be well packed to arrived to you in the condition shown. All DVD players are NTSC Region 1 player (US and Canada). All electronic devices with wall plugs are 120V 60Hz devices.
5.1 Audio System 5.1CH Audio Decoder USB DAC HDMI Power Amplifier Power Amp 450W Total Output Power Features: – 75W for each channel, 4/6/8 ohm speakers can be used, and the total power is 450W – Professional DSP audio processing chip – Support a variety of audio interface inputs, HDMIX3+ARC/optical/coaxial/AUX, USB interface and Bluetooth 5.0 receiver – Supports hard decoding and software decoding – Support source devices such as Blu-ray player, for PS, computer, set-top box and network player – DTS/AC3 5.1 source code digital audio outputs analog 6-channel audio or stereo audio through DSP hard decoding – Analog AUX signals or PCM2.0 signals are software decoded by digital processing chips to analog 5.1-channel or stereo outputs – Its panel supports LCD display and total volume adjustment; switch signal sources by pressing buttons – Support 1CH digital coaxial input, 1CH digital optical input, 3CH HDMI inputs, 1CH ARC, 1CH AUX stereo input, 1CH Bluetooth input and 1CH USB 2.0 interface input. Different sources can be switched. Support 1CH HDMI output and 1CH optical output (no output in USB and Bluetooth AUX mode) – Compatible with Bluetooth playback devices due to Bluetooth 5.0 transmission – It adopts 24BIT192KHz audio DSP and 24BIT/192KHz DAC 6-channel chip – Support for Dolby Digital AC3, DTS, PCM, HDCD, Dolby Prologic II, WAV, FLAC, APE and other lossless audio decoding – USB supports WAV, APE, FLAC, MP3, DTS and other 5.1 lossless audio playing. It supports a U disk up to 128G at FAT32 format – High quality audio, low noise and mute function for power-on and power-down to protect loudspeaker boxes – Remote control: one button to switch input sources and easy to operate. Panel button cycle switching and knob to adjust the volume – LCD screen can display song names, playing progress, playing mode, volume and output mode – HDMI input and output support HDMI 1.4 version. The maximum resolution is 4Kx2K at 30HZ – All-aluminum brushed panel and black shell with high-end appearance – Power-off memory function. After rebooting, it automatically switches to the last used signal channel Technical Parameters: – Supported digital audio decoding format: for Dolby Digital AC3/DTS/PCM – USB playback audio formats: MP3, WMA, APE, FLAC, WAV, DTS and AC3 – HDMI input and output maximum resolution: 4Kx2K at 30HZ. Support 3D, built-in 5.1 audio EDID – DSP frequency: 32-192KHZ – DSP bit stream: 16-24Bit – Digital input level: 0.2-1Vp-p – Power amplifier SNR (CCIR/ARM): 80dB – Frequency response: 20Hz20KHz – Maximum output power: front left and right / surround left and right: 75W at 4 OHM; Center/bass 75W at 4 OHM – THD. Note: – 2pcs 1.5V AA batteries for the remote control are not included. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
There are some scratches. All my products are 100% Authentic. International Buyers – Please Note. Please check with your country? I do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. We do not undervalue i.