Welcome To Our Company Online Store – MiCWL Audio Inc. Professional Original MiCWL 2 / 4 Channel Digital Power Amplifier. MiCWL Professional Digital 2 / 4 Channel Power Amplifier. 4 Channel Power Amplifier. 2 Power versions for your choose. 2 Channel Power Amplifier. 19 1U Professional Power Amplifier Design. Brand New – Original Packaging. MICWL D6400 Amplifer is a Professional 4 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The D8400 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference. Hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz) RMS: 4x650W /. Output/Output (4? , 1kHz) PEAK: 4x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2 3-4): XLR input connector; Output (CH1-2 3-4): SPEAKON output; Power: AC power Input (CH1-2 3-4): XLR Input. Connector; Output (CH1-2 3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red). Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. If your speaker is no more than 650 watts, this amplifier is enough to drive. (4 Channel can Drive 4 Unit 650W Speakers). 1x 4 Channel / 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
Should be able to be bent back in place. Protected with signature required tracking.
2 Channel x 650W Professional. 2 Channel Digital Amplifiers / 1U Rack mount design. 2 Channel Power Amplifier: (2600W). Can Drive 2 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC110120V, 50/60Hz / or. MICWL D6200 is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the 6400 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6200 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x650W. Output/Output (4? , 1kHz): 2x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2, 3-4): XLR input connector; Output (CH1-2,3-4): SPEAKON output; Power: AC power Input (CH1-2, 3-4): XLR Input Connector; Output (CH1-2,3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit less 650W speaker). 1x Digital Power Amplifier.
ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Very high quality Professional Power Amplifier. With Crystal Clear Sound quality & Ultra low Noise Amplifier. The GTD Audio T-8500 is a Professional Power Amplifier that was developed using the expertise of professional sound engineers, working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the T-6500’s awesome performance, flexibility and crystal clear sound quality. 2U Professional Power Amplifier. Maximum Output 8500 Watts. XLR, ¼ (6.5mm Jack) Balanced Inputs. Speakon and Banana binding post Outputs. Front-to-Rear Airflow and Cooling Fan. Frequency response 10Hz – 50kHz at 1.5 dB. Total Harmonic Distortion: Less than 0.1%. Input sensitivity & Impedance: 0.77v. Signal to Noise (20 Hz – 20 kHz) > 90dB. Dimensions (WxDxH): 20.1″ x 13.4″ x 3.3.
Pro 4 Channel Audio Powered Mixer power mixing Amplifier Reverb Amp 16DSP W/ USB. Condition: 100% Brand New. Net Weight(approx): 5.7kg. Volt: 110V / 60Hz. Dimensions (W x H x D): 11.8″x 12.6″ x 4.3. Speaker output: 100W RMS, 180W Max. Professional powered mixer with USB Slot. 2 Speaker output sockets. 4 Mono Input Channels with gold plated XLRs and balanced Line Inputs. Ultra-low noise discrete Mic Preamps with+48V Phantom Power. Balanced Inputs for highest signal integrity. Ultra-musical 2-band EQ on all channels. Peak LEDs all Mono Channels. 1 Aux Send per channel for external effects and monitoring. Simulate effect (16DSP Digital Effect). Master Mix Output and rec output. Highly accurate 5 segment Bargraph Meters. Separate Master Mix Outputs. USB/SD Player with display. With High, mid, low, echo, delay, reverb effect. Bluetooth function enables users to wirelessly stream music in from iPad and smartphone to mix music. Equipped with JRC chip, the supplier for YAMAHA. Help you enhance great sound quality and fine tune for a more cleaner sound. You can record the music to SD card through the recording function. Each input comes with individual volume controller to cut and activate input audio. The volume of all inputs can be adjusted by the master mic volume dial or the mic priority switch. 1 x Professional Powered Mixer. 1 x Power Cord. Buyers have to pay for the return cost and we will pay the cost for resend. All labels with clear words on the package; 2. The real goods you receive; 3. Different angles of the products and package to show the problem clearly. When you receive the item, please open the box and check the item carefully. If the item is damaged, you can refuse to receive it. We are committed to resolve all issues in a friendly and satisfactory manner. If you do not get a response from us, then please check your junk or spam mailbox.
Welcome To Our Company Online Store. MiCWL Professional 1800W CA Series Digital Power Amplifier. 2400 watts PEAK Output AMP 2 Channel 2x900W Bridge Limited Edition. Brand New – Original Packaging. MICWL CA Series CA-450W Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The CA-450W awesome performance. Flexibility and crystal clear sound quality. Ultra -large switching power amplifier. The protection functions such as automatic limit output, short -circuit, overload, over -temperature, boot delay and other protection functions. The power amplifier is equipped with a delay startup system, which is damaged by protecting the speaker from impact. The rear panel is equipped with dual channels. Balance input interface. Speakon output connector. 483mm standard rack structure. The power amplifier part of the switching power supply part has a separate cooling system. The heat dissipation fan is controlled by advanced stepless transmission circuit. 1U design, light body, easy to carry and install. 2x Channel with Bridging Function. Output/output (8? , 1kHz): 2x450W. Output/OUTPUT (4? , 1kHz): 2x900W. Frequency response/FREQUENCY Response: 20Hz 20KHz ± 3dB. Enter sensitivity/Input Sensitivity:+4DB (1.23V). Input impedance/input Impedance: 10k? (electronic balance/BALANCED). Signal ratio/S/N Ratio:? 80dB. Input (CH1-2): XLR input connector; output (CH1-2): Speakon output terminal; power: AC power supply input (CH1-2): xlr input connector; output (ch1-2): Speakon Output; Power: AC Power Supply. Display light Indicator Lights. Power display light x1 (green); input display light x 2 (yellow); peak display light x 2 (red); protecting circuit action display light x 1 (red) Power Inicator x 1 (Green), input Indicator X 2 (YELLOW), Peak Indicator X 2 (Red); Feedback Protect Indicator X 1 (Red). Power voltage/Power Supply Voltage. AC110 120V, 50/60Hz AC220 240V, 50/60Hz (using internal jump switch/via inside jumping switch). 1/8 rated movement 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. The temperature range of using the environment is worn tempeature range: 0 50? The humidity range of the environment is working with Humidity Range. Below 90% RH/Under 90% RH. How much Speaker can this amplifier drive. If your speaker is no more than 500 watts, this amplifier is enough to drive. (2 Channel can Drive 2 Unit 450W Speakers). With Bridging function, can Drive 1800W Speaker One Unit. 1x 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
Welcome To Our Company Online Store – MiCWL Audio Inc. Original MiCWL CA Series 2 Channel Professional Digital Power Amplifier Blue. 2400W Peak Power Output. 19 1U Professional Power Amplifier Design. Brand New – Original Packaging. MICWL CA Series CA-450W Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The CA-450W awesome performance. Flexibility and crystal clear sound quality. Ultra -large switching power amplifier. The protection functions such as automatic limit output, short -circuit, overload, over -temperature, boot delay and other protection functions. The power amplifier is equipped with a delay startup system, which is damaged by protecting the speaker from impact. The rear panel is equipped with dual channels. Balance input interface. Speakon output connector. 483mm standard rack structure. The power amplifier part of the switching power supply part has a separate cooling system. The heat dissipation fan is controlled by advanced stepless transmission circuit. 1U design, light body, easy to carry and install. Output/output (8? , 1kHz): 2x450W. Output/OUTPUT (4? , 1kHz): 2x900W. Frequency response/FREQUENCY Response: 20Hz 20KHz ± 3dB. Enter sensitivity/Input Sensitivity:+4DB (1.23V). Input impedance/input Impedance: 10k? (electronic balance/BALANCED). Signal ratio/S/N Ratio:? 80dB. Input (CH1-2): XLR input connector; output (CH1-2): Speakon output terminal; power: AC power supply input (CH1-2): xlr input connector; output (ch1-2): Speakon Output; Power: AC Power Supply. Display light Indicator Lights. Power display light x1 (green); input display light x 2 (yellow); peak display light x 2 (red); protecting circuit action display light x 1 (red) Power Inicator x 1 (Green), input Indicator X 2 (YELLOW), Peak Indicator X 2 (Red); Feedback Protect Indicator X 1 (Red). Power voltage/Power Supply Voltage. AC110 120V, 50/60Hz AC220 240V, 50/60Hz (using internal jump switch/via inside jumping switch). 1/8 rated movement 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. The temperature range of using the environment is worn tempeature range: 0 50? The humidity range of the environment is working with Humidity Range. Below 90% RH/Under 90% RH. How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit 450W Speakers). With Bridging function, can Drive 1800W Speaker One Unit. PEAK Power 2400W Also have1400W Super power each Channel Digital Power Amplifier for Choice please check our company. 1x 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
Welcome To Our Company Online Store. MiCWL Professional 2600W CA Series Digital Power Amplifier. 2600 watts PEAK Output AMP 2 Channel 2x1300W. Brand New – Original Packaging. MICWL CA Series CA-650W Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The CA-650W awesome performance. Flexibility and crystal clear sound quality. Ultra -large switching power amplifier. The protection functions such as automatic limit output, short -circuit, overload, over -temperature, boot delay and other protection functions. The power amplifier is equipped with a delay startup system, which is damaged by protecting the speaker from impact. The rear panel is equipped with dual channels. Balance input interface. Speakon output connector. 483mm standard rack structure. The power amplifier part of the switching power supply part has a separate cooling system. The heat dissipation fan is controlled by advanced stepless transmission circuit. 1U design, light body, easy to carry and install. Output/output (8? , 1kHz): 2x650W. Output/OUTPUT (4? , 1kHz): 2x1300W. Frequency response/FREQUENCY Response: 20Hz 20KHz ± 3dB. Enter sensitivity/Input Sensitivity:+4DB (1.23V). Input impedance/input Impedance: 10k? (electronic balance/BALANCED). Signal ratio/S/N Ratio:? 80dB. Input (CH1-2): XLR input connector; output (CH1-2): Speakon output terminal; power: AC power supply input (CH1-2): xlr input connector; output (ch1-2): Speakon Output; Power: AC Power Supply. Display light Indicator Lights. Power display light x1 (green); input display light x 2 (yellow); peak display light x 2 (red); protecting circuit action display light x 1 (red) Power Inicator x 1 (Green), input Indicator X 2 (YELLOW), Peak Indicator X 2 (Red); Feedback Protect Indicator X 1 (Red). Power voltage/Power Supply Voltage. AC110 120V, 50/60Hz AC220 240V, 50/60Hz (using internal jump switch/via inside jumping switch). 1/8 rated movement 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. The temperature range of using the environment is worn tempeature range: 0 50? The humidity range of the environment is working with Humidity Range. Below 90% RH/Under 90% RH. How much Speaker can this amplifier drive. If your speaker is no more than 650 watts, this amplifier is enough to drive. (2 Channel can Drive 2 Unit 650W Speakers). 1x 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
4 Channel x 650W Professional. 4 Channel Digital Amplifiers / 1U Rack mount design. 4 Channel Power Amplifier: (5200W). Can Drive 4 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC110120V, 50/60Hz / or. MICWL D6400 is a Professional 4 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the 6400 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 4x650W. Output/Output (4? , 1kHz): 4x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2, 3-4): XLR input connector; Output (CH1-2,3-4): SPEAKON output; Power: AC power Input (CH1-2, 3-4): XLR Input Connector; Output (CH1-2,3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (4 Channel can Drive 4 Unit less 650W speaker). 1x Digital Power Amplifier.