Car Audio & Video. Technical Pro POWER65 6500W 2 Channel 2U Power Amplifier Amp + XLR Cable. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Technical Pro POWER65 6,500 Watt 2 Channel 2U Professional Power Amplifier Amp. (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper. 6500 watts peak power. Inputs: XLR, 1/4”, RCA. Outputs: Banana binding post, Speakon, 1/4′. Dual cooling speed fans. Precise LED meters signal and clip and protect indicators to monitor performance. “CAF” (Complete Air Flow) ventilation system with automatic variable-speed fan for smooth and quiet operation. High-quality components and exceptionally rugged construction ensure long life and quality performance. Frequency Response: 20Hz-20kHz ±1 dB. Signal to Noise Ratio: -105 dB unweighted 20Hz-20kHz. Input Impedance: 20 kohm balanced/ 10 kohm unbalanced. All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable. XLR Connectors with Internal Strain Relief for Rugged Reliability. 100% Copper Conductors for Enhanced Signal Clarity. 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. Process for returning items.
Car Audio & Video. Rockville D12 5000w Peak/1400w RMS Power Amplifier 2 Channel Class D Pro/DJ Amp. Condition: BRAND NEW IN ORIGINAL PACKAGING. D SERIES AMPS PRODUCT VIDEO. HOW TO SET UP Your D Series Amplifiers. Rockville D12 5000w Peak/1400w RMS Class D 2 Channel Power Amplifier Pro/DJ Amp. LCD displays volume in dB per channel and operating temperature. 1.5U rack space. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles. Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (12A, 250V). Input Impedance: 10K Ohm Balanced. Input signal voltage: 638mV – 2.7V. Input sensitivity: 0.7v. Damping factor: (100Hz, 10w, 4 ohms): 43.6. Effective damping factor (100Hz, 10w, 4 Ohms) 1.08. Output impedance at speaker terminals: 0.0918 Ohms. Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.05%. Signal to Noise Ratio: > 100dB. SLEW RATE (input filter limited) : 40v/uS Power Requirements: 100V-240V / 50-60Hz. Weight: 9.7 lbs. Dimensions: 19.09 x 9 x 2.56 inch. Stereo 8 Ohm: 2 x 500W. Stereo 4 Ohm: 2 x 700W. Bridged 8 Ohm: 1 x 1400W. Stereo 4 Ohm: 2 x 2500W Max. Bridged 8 Ohm: 1 x 5000W Max. Combo jack (XLR and ¼) A & B inputs. Banana binding post speaker output. XLR output to connect another amplifier or powered sub. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. Process for returning items.
Car Audio & Video. Rockville RPA16 10,000 Watt 2 Channel Power Amplifier Pro/DJ Amp+Speakon Cables. Condition: BRAND NEW IN ORIGINAL PACKAGING. (1) Rockville RPA16 10000 Watt Peak / 3000w RMS 2 Channel Power Amplifier Pro/DJ Amp. (2) Rockvile RCSS1425 25′ 14 AWG Speakon to Speakon Speaker Cable 100% Copper. How to Set Up Your RPA12, RPA14, and RPA16. Stereo 8 Ohm: 2 x 1,000W. Stereo 4 Ohm: 2 x 1,500W. Bridged 8 Ohm: 1 x 3000W. Stereo 4 Ohm: 2 x 5,000W Max. Bridged 8 Ohm: 1 x 10,000W Max. Combo jack (XLR and ¼) A & B inputs. Banana binding post speaker output. XLR output to connect another amplifier or powered sub. Rockville RPA16 10,000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier. LCD displays volume in dB per channel and operating temperature. Built in limiter protects your speakers from distortion and clipping. Bridged mode allows you to combine both channels power into one channel for use with a subwoofer. Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration. Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration. Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s). Channel A & B Clipping Led Indicators. Channel A & B Separate Level Controls. Power, signal, clipping, and protection LED indicators on front of amp. Heavy duty rack mount ears with handles. Built-in variable high velocity quiet cooling fans. Maximum headroom for 4-ohm and 8-ohm Speakers. Level controls for precise setting and matching of sensitivity. Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load. User serviceable fuse (25A, 250V). Input Impedance: 10K Ohm Balanced. Input signal voltage: 660mV – 1.5V. Input sensitivity: 0.7v. Damping factor: (100Hz, 10w, 4 ohms): 36.5. Effective damping factor (100Hz, 10w, 4 Ohms) 1.08. Output impedance at speaker terminals: 0.10975 Ohms. Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.6%. Signal to Noise Ratio: > 100dB. IMD 60Hz & 1kHz, 4:1. SLEW RATE (input filter limited) : 40v/uS. Power Requirements: 120V / 50-60Hz. Weight: 40.8 lbs. Dimensions: 19.09 x 16.93 x 3.35 inch. All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer. The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use. Rockville RCSS14-25 14 AWG 2-Conductor SpeakON to SpeakON Pro Speaker Cable. 100% Copper Conductors for Lower Resistance. Black PVC Jacket for Both Durability and Flexibility. Intended for High-Current Applications Only, Not Line-Level Signals. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. Process for returning items. Item Code: RPA16+(2) RCSS1425.
All 3 units are in in excellent working and good cosmetic condition.
See photos and item description for further details.
Clean and 100% fully functional.
Up for your consideration I have the amp shown. It is in good working condition. It is used and has regular use wear including scratches and so on. If you look at the pictures, one corner has damage to it, but the amp still fully works, it does not affect the functionality of the amp. The power cable also suffered some damage by where it goes in to the amp, but works with no problems.
M350 2x800W/4x800W Home Digital Power Amplifier 2/4 Channel Power Amp+Slim Body Features: – 4cm/1.6 1U slim body – Eight protections: intelligent constant temperature system, start-up delay loading, load short-circuit protection, off-load protection, wave suppression voltage limit, over-temperature protection, overload protection and shutdown protection – Power output and intelligent control: The amplifier can control the power output. The power scale setting of the panel allows the connected speakers to operate within the power requirements, ensuring safe and reliable work – Compared with traditional power amplifiers, digital power amplifier has small size, light weight and low calorific value. It can save energy and power. The digital power amp adopts digital technology circuit board and full chip components. Stable performance and high quality. It adopts PFC regulated switching power supply, which is full of power. It works well even at low voltages – With multiple protection, the power amp runs safely and stably. When the power amplifier is short-circuited or the protection circuit of the speaker works, the power amplifier protection device starts, stops the output sound, and the temperature of the power amplifier rises. There are tips such as high temperature indication, and the cooling fan of the machine will speed up the heat dissipation Package Included: – 1 x Power Amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
Slightly scratched and soiled. Energized: Normal, Input/output: Good, Panel operation: Good, Playback operation is confirmed for about 15 minutes. We have not measured the sound quality with a measuring instrument. This is a used product and needs to be adjusted if it is used in severe settings.