Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4

Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4

Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
This is an opportunity to own a good looking and nicely working Crown K2 stereo power amplifier. It powers on, passes audio, the selectors work, and the volume pots are not scratchy. It has been well taken care of in a pet free, smoke free, temperature controlled environment. It was never toured. It does have some rack rash, but that is the only thing to mention. It provides a total of 2500w (2x1250wpc) at 2 ohms or 1600w (2x800wpc) at 4 ohms. It provides 2500w bridged mono at 4 ohms. It will be a great piece for someone. You get exactly what you see pictured. It weighs 38 lbs. Here are the specs and what Crown has to say about this great amplifier. 2 ohm Stereo (per channel) 1,250W. 4 ohm Bridge-Mono 2,500W 800W. 4 ohm Stereo (per channel) 800W. Voltage Gain 32.88 dB gain at 1.4 volt sensitivity; 25 dB gain at 3.0 volt sensitivity. Frequency Response: ±0.25 dB from 20 Hz to 20 kHz. Signal to Noise (A-weighted): > 100 dB below rated power. Damping Factor: > 3,000 from 10 to 400 Hz. Input Impedance: Nominally 20 k ohms, balanced. Nominally 10 k ohms, unbalanced. Dims 19″x3.5″x16. Accurate, uncolored sound with very low distortion for the best in music and voice reproduction. High damping factor for tight, clean bass response. Advanced design for energy conservation. Mono mode switches allow you to set up your amps/speakers in the confi guration that best suits your needs-with combined amp inputs, combined amp outputs, or both. Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. Exclusive BCA® (Balanced Current Amplifier) power design provides super efficiency for quiet, fan-free operation. Switchable input sensitivity. “Soft start” feature prevents the K-Series amplifier from drawing large currents when it is fi rst turned on so you don’t need to delay power-on of your amps. Uniquely molded, cast-aluminum front panel provides exceptional air circulation for your KSeries amplifier. K -Series amplifiers deliver more power and sound while using less energy than conventional amplifiers. And it’s all in a durable, maintenance-free package that’s just two rack spaces high. Using patented Balanced Current Amplifi er (BCA®) circuitry, Crown® K-Series amplifiers give you massive amounts of power while generating just one-tenth the heat of conventional amplifiers. In fact, the powerful K2® amplifier can deliver an amazing 1,250 watts per channel into 2 ohms (and that’s a very solid 2 ohms)! Because of their incredible effIciency, K-Series amplifiers require no internal cooling fan and feature a closed chassis. Of course, no fan means no fan noise. In addition, the closed chassis makes these amplifiers virtually immune to environmental problems such as dust, cigarette smoke, stage fog and spilled liquids. In practical, everyday terms, the K-Series amplifiers are essentially maintenance-free. As with all convection-cooled amplifiers, varying operating levels and loads may require additional air movement in high ambient temperature conditions. K-Series amplifiers are so energy efficient- more than twice that of conventional switching amps-they require signifi cantly less energy to deliver their massive power into virtually any load, no matter how difficult. In addition, each amplifier is equipped with a “green” circuit that further reduces energy use during idle periods. Energy draw is so low-only 12 watts or less-the amplifier may be kept in a continual ready state at minimal cost. This efficiency means you’ll realize significant savings over the life of the amplifier, reducing the cost of ownership, as well as enabling more K-Series amplifiers to be plugged into a single AC circuit, reducing installation costs. I used a high resolution camera to give you accurate pictures of its condition. I have years of experience packaging delicate electronics, so rest assured, this will be packaged very well. I also use high quality packaging materials. Also, please check out the other items in my store. Thank you for looking and God bless!
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4

Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP

Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP
Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP
Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP
Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP

Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP
Car Audio & Video. Crown Pro XLS2502 2400 Watt DJ/PA Power Amplifier, with DSP. Condition: AN OPEN BOX ITEM. Authorized Crown Audio Dealer! 440 Watts x 2 Channels. Frequency Response: 0 dB, -1dB. Signal to Noise: > 103dB. Crosstalk: At 1kHz: > 85 dB, At 20kHz: >55 dB. Damping Factor: > 200. Class D amp with Crown’s ultra-efficient DriveCore technology weighs less than 11 lb (5 kg). Higher DSP Capabilities: More control; has band pass filter per channel. Increased lighting functionality; turn off all LED indicators except clip and thermal to reduce distraction in dark venues. Selectable input sensitivity; 1.4Vrms and. 775Vrms options so that amp can be driven at full power. Set sleep mode after specified time without having to press a button. Security setting disables menu buttons; menu locked/unlocked by entering combination. System reset allows factory settings to be restored. PeakxT Limiters provide maximum output while protecting your speakers. XLR, 1/4, RCA inputs provide flexibility. Integrated PureBand Crossover System for better performance and control. Efficient forced-air fans prevent excessive thermal buildup. Product Dimensions: 19″ x 3.5″ 10.7 inches. Product Weight: 10.8 Lbs. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a. To replace the item for a brand new one. All replacements and exchanges are free. Process for returning items.
Crown Pro XLS2502 XLS 2502 2400w DJ/PA Power Amplifier Amp, Only 11 LBS + DSP

Crown Power Base 1 Power Amp 200 Watts Tested & Working

Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts Tested & Working

Crown Power Base 1 Power Amp 200 Watts Tested & Working
Crown Power Base 1 Power Amp 200 Watts – Tested & Working. Recently obtained from a pro audio rental facility that was liquidating excess equipment. Unit is tested and working. No issues to report. See photos for more details. Some specs at the bottom of this listing. Listing is for Crown Power Base 1 Power Amp 200 Watts – Tested & Working as pictured only. No other accessories included. GRAB IT WHILE YOU CAN! Please do not open any cases or claims without contacting us first. We will be able to resolve any problems directly and make sure that any issues are taken care of immediately. Our perfect feedback speaks for itself. THANK YOU FOR YOUR BUSINESS. All specifications apply to units in Stereo mode with 8-ohm loads and an input sensitivity of 26 dB unless otherwise specified. Standard 1 kHz Power. Refers to maximum average power in watts at 1 kHz with 0.1% THD+noise. Refers to maximum average power in watts from 20 Hz to 20 kHz with 0.1% THD+noise. 120 VAC, 60 Hz Units. Refers to amplifiers with dedicated trans- formers for 120 VAC, 60 Hz power mains. Power Base-2 : 64:1 ±12% or 36.2 dB ±1 dB at 0.775 volt sensitivity; 35:1 ±12% or 31.0 dB ±1 dB at 1.4 volt sensitivity. Power Base-3: 83:1 ±12% or 38.4 dB ±1 dB at 0.775 volt sensitivity; 46:1 ±12% or 33.3 dB ±1 dB at 1.4 volt sensitivity. The following specifications are guaran- teed minimums for standard 1 kHz power. Power Base-1 Stereo mode (both channels driven). 240 watts into 4 ohms. 200 watts into 8 ohms. Bridge-Mono mode: 455 watts into 8 ohms. 395 watts into 16 ohms. Parallel-Mono mode: 455 watts into 2 ohms. 400 watts into 4 ohms. Power Base-2 Stereo mode (both channels driven). 460 watts into 4 ohms. 325 watts into 8 ohms. Bridge-Mono mode: 910 watts into 8 ohms. 660 watts into 16 ohms. Parallel-Mono mode: 920 watts into 2 ohms. 655 watts into 4 ohms. Power Base-3 Stereo mode (both channels driven). 760 watts into 4 ohms. 540 watts into 8 ohms. Bridge-Mono mode: 1525 watts into 8 ohms. 1090 watts into 16 ohms. Parallel-Mono mode: 1530 watts into 2 ohms. 1080 watts into 4 ohms. Safe with all types of loads. Rated for 4 to 8 ohms in Stereo, 8 to 16 ohms in Bridge- Mono and 2 to 4 ohms in Parallel-Mono mode. ±0.1 dB from 20 Hz to 20 kHz at 1 watt. ±10 degrees from 10 Hz to 20 kHz at 1 watt. A-weighted, better than 105 dB be- low full bandwidth power. Better than 100 dB below full bandwidth power from 20 Hz to 20 kHz. Total Harmonic Distortion (THD). Less than 0.05% at full bandwidth power from 20 Hz to 1 kHz increas- ing linearly to 0.1% at 20 kHz. (60 Hz and 7 kHz 4:1) Less than 0.05% from less than 158 milliwatts to full bandwidth power. Greater than 1,000 from 10 Hz to 400 Hz. Power Base-1: Greater than 75 dB below full band- width power from 50 Hz to 2 kHz, rising linearly to greater than 60 dB at 20 kHz. Power Base-2 : Greater than 90 dB below full band- width power from 50 Hz to 2 kHz, rising linearly to greater than 66 dB at 20 kHz. Power Base-3 : Greater than 90 dB below full band- width power from 50 Hz to 4 kHz, rising linearly to greater than 70 dB at 20 kHz. Common Mode Rejection (CMR): Better than 70 dB below rated full bandwidth power from 20 Hz to 1 kHz falling linearly to better than 50 dB at 20 kHz. Greater than 13 volts/ms. 20:1 ±3% or 26 dB ±0.25 dB at the maxi- mum level setting (Input Sensitivity switch set to its 26 dB position). Power Base-1: 51:1 ±12% or 34.3 dB ±1 dB at 0.775 volt sensitivity; 28:1 ±12% or 29.1 dB ±1 dB at 1.4 volt sensitivity. Track Page Views With.
Crown Power Base 1 Power Amp 200 Watts Tested & Working

Crown Macro-tech 5002vz 2ch Power Amp

Crown Macro-tech 5002vz 2ch Power Amp
Crown Macro-tech 5002vz 2ch Power Amp
Crown Macro-tech 5002vz 2ch Power Amp
Crown Macro-tech 5002vz 2ch Power Amp
Crown Macro-tech 5002vz 2ch Power Amp
Crown Macro-tech 5002vz 2ch Power Amp

Crown Macro-tech 5002vz 2ch Power Amp
This Crown Macro-tech 5002vz 2ch Power Amp is a reliable piece of equipment for any professional audio setup. Built by Crown, a reputable brand in the industry, it delivers superior sound quality to enhance any performance. The specific model of this amp is the 5002vz, which is highly sought after for its power and versatility. Whether you’re a musician, DJ, or sound engineer, this amplifier is a great addition to your collection. It belongs to the Musical Instruments & Gear and Pro Audio Equipment categories and is ideal for use in amplifying sound for both live performances and recording. Don’t miss out on the opportunity to own this powerful amp. Has scratches on chassis but been in a shock rack it whole life. We have 2 available.
Crown Macro-tech 5002vz 2ch Power Amp

Crown Macro-Tech 5002vz 2ch Power Amp

Crown Macro-Tech 5002vz 2ch Power Amp
Crown Macro-Tech 5002vz 2ch Power Amp
Crown Macro-Tech 5002vz 2ch Power Amp
Crown Macro-Tech 5002vz 2ch Power Amp
Crown Macro-Tech 5002vz 2ch Power Amp

Crown Macro-Tech 5002vz 2ch Power Amp
Just taken out of service. Has the normal wear from being in a rack. Has some tape on face.
Crown Macro-Tech 5002vz 2ch Power Amp

Crown Macro-tech 2400 2ch Power Amp

Crown Macro-tech 2400 2ch Power Amp
Crown Macro-tech 2400 2ch Power Amp
Crown Macro-tech 2400 2ch Power Amp
Crown Macro-tech 2400 2ch Power Amp
Crown Macro-tech 2400 2ch Power Amp

Crown Macro-tech 2400 2ch Power Amp
Just taken out of service. Normal wear for being in a rack. We have another available if you need 2.
Crown Macro-tech 2400 2ch Power Amp

Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS

Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS
Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS
Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS
Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS
Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS

Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS
One amp is missing the know knobs(See picture). Both amps have scratches, scuff marks and other cosmetic blemishes from normal use and age. This amp has not been opened or disassembled. Only items shown in pictures are included. Sorry, no other parts, wiring or accessories included.
Crown Macro-Tech 5002VZ Power Amp #0005 (One)THS

Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel

Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel

Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel
This Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp is a powerful addition to your audio setup. With 400 watts per channel, it is perfect for amplifying sound in any setting. The amplifier is rack mountable and has 2 inputs and 2 outputs, making it easy to connect to your other audio equipment. The Crown 800 CSL amplifier features black color and is manufactured in the United States. It is designed for professional audio equipment and is perfect for use in musical performances or events. This amplifier is a great choice for anyone looking for a powerful and reliable addition to their audio setup. See pictures for conditions and style. Tested Working and Cleaned.
Crown 800 CSL 2-channel Pro Audio Stereo Power Amplifier Amp 400w Per Channel

Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA

Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA

Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA
Plenty of power for musical, theater, club, home audio applications.
Crown Com-tech 200 Pro Audio Amplifier Pa Amp P. I. P. 200 Watts Power USA

Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount

Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount

Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount. ONLY comes with what’s pictured. We appreciate all business and would recommend sending a message if any issue or concern comes up.
Crown XLS402 XLS 402 Power Amp Amplifier Rack Mount