4 Channel Digital Power Amplifier 5200 Watts Two Passages Stereo Speaker AMP
Welcome To Our Company Online Store – MiCWL Audio Inc. Professional Original MiCWL 2 / 4 Channel Digital Power Amplifier. MiCWL Professional Digital 2 / 4 Channel Power Amplifier. 4 Channel Power Amplifier. 2 Power versions for your choose. 2 Channel Power Amplifier. 19 1U Professional Power Amplifier Design. Brand New – Original Packaging. MICWL D6400 Amplifer is a Professional 4 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The D8400 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference. Hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz) RMS: 4x650W /. Output/Output (4? , 1kHz) PEAK: 4x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2 3-4): XLR input connector; Output (CH1-2 3-4): SPEAKON output; Power: AC power Input (CH1-2 3-4): XLR Input. Connector; Output (CH1-2 3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red). Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. If your speaker is no more than 650 watts, this amplifier is enough to drive. (4 Channel can Drive 4 Unit 650W Speakers). 1x 4 Channel / 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
MiCWL Digital Power Amplifier Stage AMP Drive 21 Speaker 2 Channel x2000W 8Ohms
Two Channel 7000W Professional Digital High Power Amplifier. 2 Channel Digital Amplifiers / 1U Rack mount design. 2x4000W PEAK OUTPUT – 8000W. 2 Channel Power Amplifier. Can Drive 2 Unit Speaker. Bridging Power (Mono Channel mode). 19 1U Professional Power Amplifier. Brand New – Original Packaging. AC220240V, 50/60Hz / AC110120V, 50/60Hz. MICWL PX7000 is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the PX2000 awesome performance. Flexibility and crystal clear sound quality. MiCWL PX2000 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x2000W. Output/Output (4? , 1kHz): 2x3500W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power: AC power Input (CH1-2): XLR Input Connector; Output (CH1-2): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit speaker). 1x Digital Power Amplifier.
SMSL M500 MKII Bluetooth DAC Headphone Amplifier USB DAC for Power Amp Speaker
SMSL M500 MKII Bluetooth DAC Headphone Amplifier High Resolution USB DAC for Power Amp Speakers Features: – The top performance D/A chip ES9038PRO – The high-performance power supply chip ES9311, the noise of ES9311 is as low as 1uVrms – The 3rd ES9038PRO circuit design has a surprisingly low distortion of -123dB and is more stable – The new PLFC headphone amplifier circuit enables the headphone to obtain more than 2Wrms output power and less than -120dB distortion under 16? Load – The new self-developed CK-02 clock processing circuit greatly reduces clock jitter – For XMOS XU-216, true 32bit audio processing, supports DoP and Native DSD, and reaches 32bit/768kHz and DSD512 – USB, optical, coaxial support DSD and for MQA decode, coaxial and optical support DOP64 and for MQA-CD – Latest Bluetooth chip for LDAC 24bit/96kHz, APTX/HD, SBC and AAC – Specially designed discrete component linear regulated power supply and multiple low noise regulated power supplies to provide low noise power for analog circuits – Use tempered glass display panel for higher light transmission and longer service life – Built-in shielded, low noise power supply processing, while improving power efficiency, lower power consumption – High quality gold-plated input and output jacks – 3 high-end dual op-amps OPA1612 and a lot of audio grade components are used – 1.9 inch TFT LCD display – JAS Hi-Res certification – Equipped with remote control and full-function remote control Package Included: – 1 x Bluetooth DAC with Antenna – 1 x Remote Control. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days.
SMSL A300 Power Amplifier BT5.0 165Wx2 Bluetooth Amp Passive Speaker Power Amp
SMSL A300 High Resolution Power Amplifier BT5.0 165Wx2 Bluetooth Amplifier Passive Speaker Power Amp. Package Included: – 1 x Main Unit – 1 x Antenna – 1 x Remote Control Note: – Other items pictured are not included, for demonstration purposes only. Thank you for your understanding! Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
Power Acoustik Rz5-2500d 2500 Watt Razor 5 Channel Car Amplifier Speaker Sub Amp
POWER ACOUSTIK RZ5-2500D 2500 WATT 5-CHANNEL RAZOR SERIES CLASS-D AMPLIFIER WITH BASS KNOB. Razor Series 5-Channel Car Amplifier. 4 ohms: 100 watts x 4 chan. 2 ohms: 150 watts x 4 chan. Bridged, 4 ohms: 300 watts x 2 chan. 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. Max power output: 2500 watts x 1 chan. Wired remote bass level control included. Variable Bass Boost (0 to +12 dB bass boost at 45 Hz). 5/4/3/2 or Mono channel operation. Variable high-pass filter (35-250 Hz). Variable low-pass filter (35-250 Hz). 8 gauge power and ground wiring is required for installation. Dimensions: 4-3/4″W x 7-1/2″L x 1-1/2H. Our company has been in the stereo business for over 15 years. We will gladly answer any technical questions you have.
Power Acoustik MA4-3000D 3000W Max 4Ch Amp Class D Speaker Marine Boat Amplifier
Marine Grade 4 Channel 3,000 Watts Class D Amp. The Power Acoustik MA4-3000D is built from the ground up to be the finest possible amp for your off-road vehicles, motorcycles, or personal watercraft. Made splash-and-spray-resistant conformal coated circuit boards and terminals, It’s all engineered to maintain top-shelf performance for years to come. The MA4-3000D is a 3,000 watt max 4 Channel marine grade amp perfect for powering multiple speakers or you can use it to power a pair of speakers and a subwoofer in 3-way mode. 4 channel class D marine amplifier. MOSFET power supply w/ audiophile grade IRTM transistors. Military Grade SMT PCB Maintains Dynamic Performance. Conformal coated circuit boards and terminals. Direct short, thermal, & overload circuits protect amplifier. 285 watts RMS x 4 at 4 ohms. 375 watts RMS x 4 at 2 ohms. 750 watts RMS x 2 at 4 ohms. Variable high and low pass filters (50-250 Hz, 12 dB/octave). Variable subsonic filter (10-50Hz at 12dB). Speaker line level inputs. 12-1/4″ W x 1-5/8″ H x 4-3/4 D. 4 gauge power and ground wiring is recommended for installing this amplifier.
220V Home Bass Amplifier Digital Power Amp 300W-600W Home Theater Speaker Board
220V Home Amplifier Bass Amplifier Digital Power Amp 300W-600W Home Theater Speaker Amplifier Board Attention: This power amplifier is pure low frequency, that is, it only pushes the bass and does not produce human voice. Description: This amplifier uses a 300W high-power pure copper transformer! Original brand new 5200/1943 for power amplification! The original all-silver point gold-plated contact relay for OMRON. The front-stage low-pass circuit uses a bass loose and powerful 4558 op amp! Features: – Support high level input and normal audio input – Fit 4 ohms, 8 ohms, 10 inches, 12 inches, 15 inches speakers – Original audiophile electrolytic capacitors – Input voltage 220V/110V. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
MiCWL 8000W Peak 2 Channel Digital Power Amplifier Stage AMP Drive 21 Speaker
Two Channel 4600W Professional Digital High Power Amplifier. 2 Channel Digital Amplifiers / 1U Rack mount design. 2x4000W PEAK OUTPUT – 8000W. 2 Channel Power Amplifier: (4600W). Can Drive 2 Unit Speaker. Bridging Power (Mono Channel mode). 19 1U Professional Power Amplifier. Brand New – Original Packaging. AC220240V, 50/60Hz / AC110120V, 50/60Hz. MICWL DX1400 is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the DX1400 awesome performance. Flexibility and crystal clear sound quality. MiCWL DX1400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x1400W. Output/Output (4? , 1kHz): 2x2300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power: AC power Input (CH1-2): XLR Input Connector; Output (CH1-2): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit speaker). 1x Digital Power Amplifier.