CA 600Wx2 Professional Power Amplifier Digital Power Amp Two Channel Amplifier for Disco Performance Features: – 600Wx2 digital power amplifier: Hifi-grade power and two output channels, small volume with large energy – Upgraded functions: Powerful output and reliability, intelligent processing, powerful power and simple operation – Ultra light, portable design and slim body – Two output channels and each channel can output 600W – Short circuit, over-current, over-load, voltage and self-service protection ensure stable performance, making it safe to use – Cooling fan runs at a fast speed and quietly – Born for good quality: Power supply with soft-start shock protection, DC output protection, overload and over-temperature protection to make the system work stably and reliably – Exhaust heat dissipation system: the heat dissipation holes on the left and right sides plus a large block of aluminum heat sink can greatly reduce the temperature in the machine, improve the stability of the whole machine and ensure long-term stable performance – The sound is accurate and clear and thick and powerful. The bass is full, the midrange is not hard, the treble is glitch-free, and the hearing is full, bright and clear – Can be used to drive 12 speakers and tap into the strength of the device – Newly designed circuit helps boost its working efficiency – Switching power transformer: High-quality switching power transformer in small size, with strong explosive power and stable performance – Large-capacity filter capacitors: Due to the capacitors and built-in limiting circuit, it is not easy to make the sound muffled in a distorted state – Professional transistor: The channel transistor outputs a lot of power to provide sufficient driving force – Large area aluminum strip improves heat dissipation. The thickened strip quickly absorbs heat and transfers it through the fan – Suitable for performances, conferences, KTV, bars, etc. Specifications: – Product Name: Power Amplifier – Power: 600W2 – Distortion. 1000 – Frequency Response: 20Hz -20kHz +/-0.25dB – Switch Rate: 50V/us – Input Impedance: 30k? Balanced – Input Sensitivity: 0.775V – DC Residual. 95 at >500W – Maximum Output Voltage/Current: 100Vpeak / 50Apeak – Power: standard switch mode with PEC (Power Factor Correction) technique Package Included: – 1 x Power Amplifier – 1 x Power Cable – 1 x User Manual. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
Powerful 4 working modes: A200 can be used as a full-frequency amp or a subwoofer amp, with mono / 2.0 channel stereo mode and full-frequency / subwoofer mode switch, easily to use any combination to build various sound systems and satisfy different demands. Strong compatibility and large output power: Adopt NE5532 op-amp and TPA3250 amp chip, equipped with 32V/5A large power supply, enough to drive 100W full frequency speakers and 160W subwoofers, can match most home speakers. User-friendly design: With a bass frequency adjustment (40-160Hz), easy to get a perfect sound according to your listening preferences; designing a VU meter sensitivity regulator, easy to adjust and match the audio signals of different levels to get better visual effects. Nobsound & Douk Audio. Preamp & Phono Stage. DAC & Audio Adapter. Music Spectrum & Clock. Record Player & Turntable Part. Audio Board & DIY Kit. Bluetooth & XLR & MIC. Tube Sound Level Meter. LED Sound Level Meter. Board & DIY Kit. Record Weight & Clamp. 1/8 & 1/4 Stereo Jack Cable. HiFi Mono/2.0 Channel Digital Amplifier Full Frequency / Subwoofer Power Amp. If you want to use mono channel output, please connect the subwoofer or speaker to the top group of speaker jacks marked PBTL. Connect to 1PC passive speaker. Connect to 1PC passive subwoofer. Connect to 2PCS passive speaker. Connect to 2PCS passive subwoofers. Unique appearance and proper size: Vertical placement design, with retro and elegant VU meter, fashionable and durable solid aluminum chassis, both enjoyment of auditory and visual, very suitable for HiFi home and desktop audio system use. Audio input: Stereo RCA. Audio output: Banana speaker jacks. Max output power of 2.0 channel. Max output power of mono channel. Bass cut-off frequency: 40-160Hz. THD: 0.02%(1kHz, 1W). Input sensitivity: 0.775V. Frequency response: 20Hz-20KHz(±3dB). Net weight: 768g/1.69lb. Package weight: 1.50kg/3.31lb. Dimensions:(WDH): 50137146mm / 1.975.395.75in. Package dimensions(WDH): 30023065mm / 11.819.062.56in. Please leave VALID TELEPHONE NUMBER which is necessary and very important. For package less than 2KG, we use. (10-25 days to most countries). And for package over than 2KG we use. (5-8 days to most countries). Free Return Within 30 Days. We provide return within 30 days. Is provided for all items. Man-made damage or misuse. Audio accessories and consumables such as vacuum tubes. If you are satisfied with our products and service please leave a 5-star. Feedback, we will provide better solutions until you are satisfied. Douk Audio / Nobsound Studio was founded in 2013 in Shenzhen CHINA, we own several brands including. Douk Audio / Nobsound / Little Bear. As a professional audio company, we are dedicated to design and produce the best products at the lowest prices to make HiFi affordable. We will spare no efforts to bring great products and service for. Improve our customers’ listening experience. During holiday, please allow us to response you early next week. Please don’t leave any negative / neutral feedback or make dispute/claim on our non-working time, thank you for your understanding and cooperation.
FP10000P (1300W4) 4 Channel Amplifier Digital Power Amplifier Power Amp for Performance Stage Show Features: – 1300W4 digital power amplifier – 4-channel surging power output provides provide strong momentum and detonates the passion of the whole show – 24-hour uninterrupted business operation due to output current limit, DC protection, filtering protection, over-temperature protection and short-circuit protection – 4 temperature-controlled fans of high speed for forced air cooling – Copper for the electrical industry is used for rapid heat dissipation – Premium components are used to ensure excellent performance – Can be applied to KTV, bars, outdoor performances, meetings, etc. Package Included: – 1 x Power amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
2 Channel x 650W Professional. 2 Channel Digital Amplifiers / 1U Rack mount design. 2 Channel Power Amplifier: (2600W). Can Drive 2 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC110120V, 50/60Hz / or. MICWL D6200 is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the 6400 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6200 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x650W. Output/Output (4? , 1kHz): 2x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2, 3-4): XLR input connector; Output (CH1-2,3-4): SPEAKON output; Power: AC power Input (CH1-2, 3-4): XLR Input Connector; Output (CH1-2,3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit less 650W speaker). 1x Digital Power Amplifier.
Welcome To Our Company Online Store – MiCWL Audio Inc. Original MiCWL CA Series PX8000. 2 Channel Professional Digital Power Amplifier. Bridging Power (Mono Channel mode). 19 1U Professional Power Amplifier Design. Brand New – Original Packaging. MICWL PX8000 Amplifer is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with. The PX8000 awesome performance. Flexibility and crystal clear sound quality. (90V-240V universal version 4 Power Versions options). MiCWL PX8000 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference. Hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz) RMS: 2x650W / 2x850W/ 2x1000W / 2x1400W/ 2x2000W / 2x2300W…. Output/Output (4? , 1kHz) PEAK: 2x1300W / 2x1600W/2x1800W/ 2x2100W / 2x2300W…. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2 3-4): XLR input connector; Output (CH1-2 3-4): SPEAKON output; Power: AC power Input (CH1-2 3-4): XLR Input. Connector; Output (CH1-2 3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red). Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. If your speaker is no more than 650 watts, this amplifier is enough to drive. (4 Channel can Drive 4 Unit 650W Speakers). If your speaker is no more than 850 watts, this amplifier is enough to drive. (2 Channel can Drive 2Unit 850W Speakers). If your speaker is no more than 2300 watts, this amplifier is enough to drive. (2 Channel can Drive 2 Unit 2300W Speakers). 1x 2 Channel Digital Power Amplifier. 1x Power Cable. 1x Box packaging.
FP10000P (1300W4) 4 Channel Amplifier Digital Power Amplifier Power Amp for Performance Stage Show Features: – 1300W4 digital power amplifier – 4-channel surging power output provides provide strong momentum and detonates the passion of the whole show – 24-hour uninterrupted business operation due to output current limit, DC protection, filtering protection, over-temperature protection and short-circuit protection – 4 temperature-controlled fans of high speed for forced air cooling – Copper for the electrical industry is used for rapid heat dissipation – Premium components are used to ensure excellent performance – Can be applied to KTV, bars, outdoor performances, meetings, etc. Package Included: – 1 x Power amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
1x CA6400 4 Channel 5200W Professional. 4 Channel Digital Amplifiers / 1U Rack mount design. 4 Channel Power Amplifier: (5200W). Can Drive 4 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC AC110120V, 50/60Hz / or. 1x Digital Power Amplifier. MICWL CA6400 is a Professional 4 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the CA6400 awesome performance. Flexibility and crystal clear sound quality. MiCWL CA6400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 4x650W. Output/Output (4? , 1kHz): 4x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2, 3-4): XLR input connector; Output (CH1-2,3-4): SPEAKON output; Power: AC power Input (CH1-2, 3-4): XLR Input Connector; Output (CH1-2,3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (4 Channel can Drive 4 Unit less 650W speaker).
2 Channel x 650W Professional. 2 Channel Digital Amplifiers / 1U Rack mount design. 2 Channel Power Amplifier: (2600W). Can Drive 2 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC110120V, 50/60Hz / or. MICWL D6200-Blue is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the D6200 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6200-Blue Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x650W. Output/Output (4? , 1kHz): 2x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power: AC power Input (CH1-2): XLR Input Connector; Output (CH1-2): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 4 Unit less 650W speaker). 1x Digital Power Amplifier.
220V Home Amplifier Bass Amplifier Digital Power Amp 300W-600W Home Theater Speaker Amplifier Board Attention: This power amplifier is pure low frequency, that is, it only pushes the bass and does not produce human voice. Description: This amplifier uses a 300W high-power pure copper transformer! Original brand new 5200/1943 for power amplification! The original all-silver point gold-plated contact relay for OMRON. The front-stage low-pass circuit uses a bass loose and powerful 4558 op amp! Features: – Support high level input and normal audio input – Fit 4 ohms, 8 ohms, 10 inches, 12 inches, 15 inches speakers – Original audiophile electrolytic capacitors – Input voltage 220V/110V. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
The newly produced HIFI Audiophile Mono high-power IRS2092 Class D digital power amplifier can cope with a 2? Load, Effective power 2? 1000W, 4? 900W, 8? 600W, mono structure. Using IRFB4227 TO-3P big tube, the big tube sounds more powerful. The effect is not doubtful, the sound is free, the low frequency is flexible, and the dynamics are first-class. The power amplifier board comes with temperature protection, speaker protection, mid-point DC protection, The main chip adopts the original imported IRS2092 and IR company’s digital audio dedicated MOSFET field effect tube IRFP4227, adopts the red gray ring T130 large magnetic ring inductor made of German imported materials, the PCB adopts KB grade military grade board, the board thickness is 2mm, and the thickness of the board is the best. The core materials and layout are carefully selected and designed. The maximum output power is 1000W+1000W, and the water chestnut appearance design is very beautiful Use all-aluminum chassis, gold-plated CMC RCA+Crystal connected to SPK post. Dual single independent channel LLC soft switching power supply, physically separated by about 100%. Working voltage: AC110V or AC220V (optional) Note: The AC110V version power board is different from the picture. Output power (MAX): 1000W/2? , 900W/4? , 600W/8? Efficiency: >= 90% SNR: 90dB Speaker: 2? 4? 8? Color: Silver or Black Dimensions (WHD): 42590312MM Net weight: about 6.5KG NOTE: This class D power amplifier is a pure power amplifier, no potentiometer. If you want to adjust the volume, please control it at the audio source input, or add a good preamplifier to control the volume. 1 × IRS2092 1000W Stereo Digital Power Amplifier NOTE: We do not provide any cables.