FP10000P (1300W4) 4 Channel Amplifier Digital Power Amplifier Power Amp for Performance Stage Show Features: – 1300W4 digital power amplifier – 4-channel surging power output provides provide strong momentum and detonates the passion of the whole show – 24-hour uninterrupted business operation due to output current limit, DC protection, filtering protection, over-temperature protection and short-circuit protection – 4 temperature-controlled fans of high speed for forced air cooling – Copper for the electrical industry is used for rapid heat dissipation – Premium components are used to ensure excellent performance – Can be applied to KTV, bars, outdoor performances, meetings, etc. Package Included: – 1 x Power amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
FP20000Q 4 Channel Power Amplifier 7000W At 2Ohms Profesional Audio Subwoofer Amps & Line Array For Stage Performance Professional Disco Dj Power Amplifier. Short Circuit Protection 3. Over Heat Protection 4. Input Overload Protection 5. Output Overload Protection 6. Over Voltage Protection 7. Low Voltage Protection 8. Inductor resonance overpressure protection P20000Q Power Amplifier Specification: – 8? Stereo Power (RMS): 2250W X 4 – 4? Stereo Power (RMS): 4000W X 4 – 8? Bridged Power (RMS): 80000W X 2 – 4? Bridged Power (RMS): 90000W X 2 – Frequency Response(+o/-0.3dB, 1W/8?):20 Hz – 34 kHz – THD 20 Hz – 20 kHz for 1 W. 112 dBA – Channel separation (Crosstalk) at 1 kHz :>70 dB – Input Connectors (per channel):3 pin XLR, electronically balanced – Output Connectors (per channel):Binding Posts 2-pole – Class:TD – TourClass Protection:ACL, IGM, AutoRamp, short circuit, DC voltage, turn on/off transient, current inrush, sub/ultrasonic input – Operating voltage, 220 V / 110 V nominal:180-240 V / 90-130 V selectable – Voltage Gain(dB):23, 26, 29, 32, 35, 38, 41, 44 dB selectable – Input impedance:20 kOhm – Level adjustment per ch. :Front panel potentiometer, 31 positions detented from -inf to 0 dB – Gross weight(kg) : 19.5kg. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
FP10000P (1300W4) 4 Channel Amplifier Digital Power Amplifier Power Amp for Performance Stage Show Features: – 1300W4 digital power amplifier – 4-channel surging power output provides provide strong momentum and detonates the passion of the whole show – 24-hour uninterrupted business operation due to output current limit, DC protection, filtering protection, over-temperature protection and short-circuit protection – 4 temperature-controlled fans of high speed for forced air cooling – Copper for the electrical industry is used for rapid heat dissipation – Premium components are used to ensure excellent performance – Can be applied to KTV, bars, outdoor performances, meetings, etc. Package Included: – 1 x Power amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
1x CA6400 4 Channel 5200W Professional. 4 Channel Digital Amplifiers / 1U Rack mount design. 4 Channel Power Amplifier: (5200W). Can Drive 4 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC AC110120V, 50/60Hz / or. 1x Digital Power Amplifier. MICWL CA6400 is a Professional 4 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the CA6400 awesome performance. Flexibility and crystal clear sound quality. MiCWL CA6400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 4x650W. Output/Output (4? , 1kHz): 4x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2, 3-4): XLR input connector; Output (CH1-2,3-4): SPEAKON output; Power: AC power Input (CH1-2, 3-4): XLR Input Connector; Output (CH1-2,3-4): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (4 Channel can Drive 4 Unit less 650W speaker).
4x2500W 220V Four-Channel Power Amplifier Stage Amplifier Power Amp for Professional DJ Equipment Description: It is a high performance switching power amplifier, and each channel is designed with independent adjustable peak output voltage. It is built with intelligent protection circuit, using advanced technology. It can be used in places such as large-scale performances, venues and business senior entertainment clubs. Furthermore, all the electronic component are from big brand such as connector for Neutrik and transistor for Sanken. Specifications: 8? Stereo power: 4x1300W 4? Stereo power: 4x2100W 2? Stereo power: 4x2500W 8? Bridge power: 2x4200W 4? Bridge power: 2x5000W Frequency response (+0/-0.3dB, 1W/8?): 20Hz-34KHz Total harmonic distortion 20 Hz-20 kHz 1W. 112dB Channel separation (crosstalk) 1 kHz: >70dB Input connector: XLR female Output connector: Speakon socket Input impedance: 20K? Balanced Level adjustment: front panel potentiometer, from negative infinity to 0dB Cooling method: stepless speed regulation fan, air flow from front to back Power amplifier protection methods: short circuit, open circuit, DC voltage, overheating, radio frequency, ultra-low frequency protection Power specification: AC 220V (±10%) 50-60Hz Chassis size: 396 x 483 x 88mm/15.6 x 19 x 3.5 (LxWxH) Net weight: 12kg/26.5lb Package Included: 1 x Power Amp 1 x Power Cable 1 x User Manual. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
2 Channel x 650W Professional. 2 Channel Digital Amplifiers / 1U Rack mount design. 2 Channel Power Amplifier: (2600W). Can Drive 2 Unit Speaker. 19 1U Professional Power Amplifier. ATR (Accelerated Transient Response) technology for ultimate punch and clarity. Brand New – Original Packaging. AC110120V, 50/60Hz / or. MICWL D6200-Blue is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the D6200 awesome performance. Flexibility and crystal clear sound quality. MiCWL D6200-Blue Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. With Combined signal function, Multiple amplifiers can be connected in parallel to drive multiple speakers. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x650W. Output/Output (4? , 1kHz): 2x1300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power: AC power Input (CH1-2): XLR Input Connector; Output (CH1-2): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 4 Unit less 650W speaker). 1x Digital Power Amplifier.
105dB (1KHz) ; 80dB (20KHz). Input: XLR female, TRS (1/4 inch) output binding post and Speaker socket. Signal indication, protection indication, overheat. 8 ohms 450Watts 4 ohms 800Watts. XP3250 Professional High Quality Class H Amp DJ Stage Performance 850W2 High Power Amplifier. Two-channel professional analog power amplifier Class H Rated power (RMS) 8 ohms: 350wx2 4 ohms: 650wx2 High stability, pre-heat soft protection, stereo, bridge, parallel mode Standard 2U structure Each channel can drive a 15-inch or smaller speaker Power output interface NL4FC, speaker terminal Input/association interface XLR pure copper toroidal transformer, AC input voltage: AC230V50-60Hz.
FP10000P (1300W4) 4 Channel Amplifier Digital Power Amplifier Power Amp for Performance Stage Show Features: – 1300W4 digital power amplifier – 4-channel surging power output provides provide strong momentum and detonates the passion of the whole show – 24-hour uninterrupted business operation due to output current limit, DC protection, filtering protection, over-temperature protection and short-circuit protection – 4 temperature-controlled fans of high speed for forced air cooling – Copper for the electrical industry is used for rapid heat dissipation – Premium components are used to ensure excellent performance – Can be applied to KTV, bars, outdoor performances, meetings, etc. Package Included: – 1 x Power amp. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.
Two Channel 4600W Professional Digital High Power Amplifier. 2 Channel Digital Amplifiers / 1U Rack mount design. 2x4000W PEAK OUTPUT – 8000W. 2 Channel Power Amplifier: (4600W). Can Drive 2 Unit Speaker. Bridging Power (Mono Channel mode). 19 1U Professional Power Amplifier. Brand New – Original Packaging. AC220240V, 50/60Hz / AC110120V, 50/60Hz. MICWL DX1400 is a Professional 2 Channel Digital Power Amplifier that was developed using the expertise of professional sound engineers. Working musicians and professional DJ’s. For its price range, it’s rare to find a professional power amplifier that compares with the DX1400 awesome performance. Flexibility and crystal clear sound quality. MiCWL DX1400 Digital Power Amplifier and other Commercial prodcuts integrated solutions for large shopping malls, conference hassls, transportation hubs and so on. Use the world’s most advanced efficient switching power supply (SMPS) and Class D power amplifier (CLASS D) design. Patented design of high quality porous heat sink, in harsh environments can be normal in low temperature operation. Adopts the imported teflon wire, ensure the transformer can normally work efficeently at high temperature. Built in Digital audio processor function. With volume switch, Adjustable volume. Full set of protection functions to ensure that the product normally working. Input Voltage: AC220240V, 50/60Hz or AC110120V, 50/60Hz. (please leave message or Choose). Speakon and 1/4 Outputs. Front-to-Rear Airflow and Cooling Fan. Large capacity Digital Switching Power Amplifier. Automatic limit output, short circuit, overload, over temperature, power-on delay and other protection functions. The power amplifier is equipped with a delay start system to protect the speakers from impact and damage. The rear panel is equipped with dual channels. Balanced input interface. SPEAKON output connector. 483MM standard frame structure. The switching power supply of the power amplifier part has a separate cooling system. The cooling fan is controlled by an advanced stepless variable speed circuit. 1U design, light body, easy to carry and install. Output/Output (8? , 1kHz): 2x1400W. Output/Output (4? , 1kHz): 2x2300W. S/N ratio: 112dB (A-weighting). Frequency Response/Frequency Response: 20Hz20kHz +/-0.25dB. Total Distortion/Total Distortion: 1% (8? , at 600W). Input Sensitivity/Input Sensitivity: +3dB (0.775V). Input Impedance: 10k? (electronically balanced/Balanced). Input (CH1-2): XLR input connector; Output (CH1-2): SPEAKON output; Power: AC power Input (CH1-2): XLR Input Connector; Output (CH1-2): SPEAKON Output; Power: AC power supply. Power indicator x 1 (green); input indicator x 2 (yellow); peak indicator x 2 (red); protection circuit action indicator x 1 (red) Power Indicator x 1 (Green), Input Indicator x 2 (Yellow), Peak Indicator x 2(Red); Feedback Protect Indicator x 1(Red). AC220240V, 50/60Hz / or AC110120V, 50/60Hz (using internal jumper switch/Via inside jumping switch). 1/8 Rated Activity Consumed Power: 50W, 80W, 110W. Working Temperature Range: 050? Below 90%RH/Under 90% RH (But it can not be condensation). How much Speaker can this amplifier drive. (2 Channel can Drive 2 Unit speaker). 1x Digital Power Amplifier.
4x2500W 220V Four-Channel Power Amplifier Stage Amplifier Power Amp for Professional DJ Equipment Description: It is a high performance switching power amplifier, and each channel is designed with independent adjustable peak output voltage. It is built with intelligent protection circuit, using advanced technology. It can be used in places such as large-scale performances, venues and business senior entertainment clubs. Furthermore, all the electronic component are from big brand such as connector for Neutrik and transistor for Sanken. Specifications: 8? Stereo power: 4x1300W 4? Stereo power: 4x2100W 2? Stereo power: 4x2500W 8? Bridge power: 2x4200W 4? Bridge power: 2x5000W Frequency response (+0/-0.3dB, 1W/8?): 20Hz-34KHz Total harmonic distortion 20 Hz-20 kHz 1W. 112dB Channel separation (crosstalk) 1 kHz: >70dB Input connector: XLR female Output connector: Speakon socket Input impedance: 20K? Balanced Level adjustment: front panel potentiometer, from negative infinity to 0dB Cooling method: stepless speed regulation fan, air flow from front to back Power amplifier protection methods: short circuit, open circuit, DC voltage, overheating, radio frequency, ultra-low frequency protection Power specification: AC 220V (±10%) 50-60Hz Chassis size: 396 x 483 x 88mm/15.6 x 19 x 3.5 (LxWxH) Net weight: 12kg/26.5lb Package Included: 1 x Power Amp 1 x Power Cable 1 x User Manual. Usually it costs about 30USD-50USD. Thanks for your understanding. If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days.