8,000 Watt Mono-Block Class D Amplifier with Wired Bass Knob. Class D Monoblock Amplifier. Hybrid Aluminum Alloy Heatsink for Optimum Dissipation. 1-ohm Minimum Impedance Class D Monoblock Operation. MOSFET Power Supply w/ Audiophile Grade IRTM Transistors. Military Grade SMT PCB Maintains Dynamic Performance. Direct Short, Thermal, & Overload Circuits Protect Amplifier. 200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs. Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs. Variable 12dB High Pass, Low Pass, & Subsonic Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. Dash Mount Gain Control Module Included. Dimensions: 15″L x 8.75″W x 2H. Our company has been in the stereo business for over 15 years. We will gladly answer any technical questions you have.
8000 WATT CALIBER SERIES CLASS-D MONOBLOCK 1-OHM STABLE AMPLIFIER WITH REMOTE BASS KNOB INCLUDED. Class-D Full Range 1-Ohm Stable Monoblock Amplifier. 4 ohms: 1,500 watts x 1 chan. 2 ohms: 2,500 watts x 1 chan. 1 ohm: 4,000 watts x 1 chan. Total power output: 8,000 watts. Pulse Width Modulated MOSFET power supply. Wired remote bass level control included. LED power (green) and protect (red) indicators. Preamp RCA outputs to daisy chain multiple amps. 3-way protection circuitry (thermal, overload, and speaker short protection). Heavy duty aluminum alloy heat-sink. Frequency Response: 15 – 500 Hz. Signal to Noise Ration: 105 dB. Variable low-pass filter: 40 – 180 Hz, 12 dB/octave. Subsonic filter: 10 – 50 Hz, 12 dB/octave. Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz. Dimensions: 9.5″ W x 18″ L x 2 H. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.
10,000 Watt Mono-Block Class D Amplifier with Wired Bass Knob. Class D Monoblock Amplifier. Hybrid Aluminum Alloy Heatsink for Optimum Dissipation. 1-ohm Minimum Impedance Class D Monoblock Operation. MOSFET Power Supply w/ Audiophile Grade IRTM Transistors. Military Grade SMT PCB Maintains Dynamic Performance. Direct Short, Thermal, & Overload Circuits Protect Amplifier. 200mV-6V Low Level/RCA Input w/ Bridged Operation Outputs. Barrier Strip Wire Terminals, 4g Power & 8g Speaker Outputs. Variable 12dB High Pass, Low Pass, & Subsonic Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. Dash Mount Gain Control Module Included (monoblocks). Dimensions: 18.25″L x 8.75″W x 2H. Our company has been in the stereo business for over 15 years. We will gladly answer any technical questions you have.
POWER ACOUSTIK RZ5-2500D 2500 WATT 5-CHANNEL RAZOR SERIES CLASS-D AMPLIFIER WITH BASS KNOB. Razor Series 5-Channel Car Amplifier. 4 ohms: 100 watts x 4 chan. 2 ohms: 150 watts x 4 chan. Bridged, 4 ohms: 300 watts x 2 chan. 4 ohms: 400 watts x 1 chan. 2 ohms: 600 watts x 1 chan. Max power output: 2500 watts x 1 chan. Wired remote bass level control included. Variable Bass Boost (0 to +12 dB bass boost at 45 Hz). 5/4/3/2 or Mono channel operation. Variable high-pass filter (35-250 Hz). Variable low-pass filter (35-250 Hz). 8 gauge power and ground wiring is required for installation. Dimensions: 4-3/4″W x 7-1/2″L x 1-1/2H. Our company has been in the stereo business for over 15 years. We will gladly answer any technical questions you have.
Overdrive Series 5000 Watt Monoblock Class D Amplifier with Remote Bass Knob. Power Acoustik Overdrive Series OD1-5000D. Class-D 1-Ohm Stable Monoblock Amplifier. 4 ohms: 800W x 1 chan. 2 ohms: 1300W x 1 chan. 1 ohm: 2000W x 1 chan. Total power output: 5000 watts max. Military Grade PCB w/ PWM MOSFET Power Supply. High/Speaker Level & Low Level/RCA Input. Direct Short, Thermal, & Overload Circuit Protection. Variable 12dB High & Low Pass Crossovers. 12dB Bass Boost Increases Low Octave Harmonics. 4g Power Wire & 8g Speaker Wire Outputs. Dimensions: 2.3″ H x 7.25″ W x 12.25? D. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.
POWER ACOUSTIK RE5.3000D. 3000 WATT CALIBER SERIES 5 CHANNEL CLASS A/B AMPLIFIER WITH REMOTE BASS KNOB. Power Acoustik RE5-3000D 3000 Watt 5-Channel Car Amplifier. 5 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 3000 Watts. 4 Ohm RMS: 100 Watts x 4 + 350 Watts x 1. 2 Ohm RMS: 150 Watts x 4 + 500 Watts x 1. 4 Ohm RMS Bridged: 300W x 2 + 500 Watts x 1. Direct Short, Thermal, & Overload Circuits Protection. 200mV-6V High Level or Low Level RCA Input. Variable 12dB High, Low, & Subsonic Crossovers. Variable 12dB Band-Pass Crossovers. Power & 12ga Speaker Terminals. Dash Mounted Remote Gain Control. Product Dimensions (L x W x H): 15″ x 8.5″ x 2.2 inches. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.
10,000 WATT EDGE SERIES MONOBLOCK CLASS D AMPLIFIER WITH REMOTE BASS KNOB. Power Acoustik Edge Series EG1-10000D. 4 ohms: 1600 watts x 1 chan. 2 ohms: 3300 watts x 1 chan. 1 ohm: 5000 watts x 1 chan. 0.5 ohm: –Not Listed. Total power output: 10,000 watts. Military Grade PCB w/ PWM MOSFET power supply. Wired remote bass level control included. LED power (green) and protect (red) indicators. Preamp RCA outputs to daisy chain multiple amps. 3-way protection circuitry (thermal, overload, and speaker short protection). Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty aluminum alloy heat-sink for extreme heat dissipation. Input sensitivity: 200mV – 6V. Frequency Response: 15 – 250 Hz. Total Harmonic Distortion (THD). Signal to Noise Ration: >105 dB. Variable low-pass filter: 40 – 220 Hz. Subsonic filter: 15 – 50 Hz. Variable Bass Boost: 0 to +12 dB bass boost. Dimensions: 9″ W x 20.5″ L x 2.25 H. Our company has been in the stereo business for over 15 years. We will gladly answer any technical questions you have.
Power Acoustik SB1.7500D. 7,500 Watt SABER Series Monoblock Class D Car Amplifier with Wired Remote Bass Knob. COMES WITH 3 YEAR. Authorized dealer so you get up-to-date, fully warrantied products. Saber Series 5 Monoblock Class-D Car Amplifier. User’s Manual. Unleash the Power of Pure Sound on the Road with Saber Series Amplifiers. The Power Acoustik SB1.7500D Saber Series is a monoblock Class-D car amplifier designed for car audio applications. The SB1.7500D belongs to Power Acoustik’s Saber Series, which is a line of amplifiers known for their high power output and performance. The Saber Series amplifiers are designed to deliver clean and powerful sound for car audio enthusiasts. Elevate Your Car Audio Experience with Class-D Efficiency and Power. The SB1.7500D features a Class-D amplifier design. Class-D amplifiers are known for their efficiency, compact size, and ability to deliver high power output. They use pulse-width modulation (PWM) to amplify the audio signal, allowing for efficient power conversion. This amplifier is a monoblock, meaning it is designed to power a single channel or subwoofer. It is ideal for applications where you want to dedicate the amplifier’s power to a specific speaker or subwoofer. Weighing-in featherweight, SABER amplifiers still pack a heavyweight punch. These contenders bulk-up with the latest in class D amplifier technology, fueling them to go the distance. Title challengers include single 2ch & 4ch upstarters & three 1-ohm stable monoblock underdogs. Don’t get caught on the ropes against these maulers, they are the pound-for-pound prizefighter in the main event. SABER Standard Features 1-ohm Stable High Efficiency Class D Monoblock Amplifier Compact 5.00 Chassis Design for Installation Versatility MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier Variable 12dB/Octave Low Pass, & Subsonic Crossovers 200mV-6V Low Level RCA Inputs High Level Input w/ Signal Sense Auto Turn-on 8g Power Wire & 8g Speaker Wire Outputs 12dB Bass Boost Increases Low Octave Harmonics Dash Mount Gain Control Module Included. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.
3500 WATT MONOBLOCK CLASS D AMPLIFIER WITH WIRED REMOTE BASS KNOB. We’re in a time where small is in. Smaller, more economic vehicles are more and more desirable. But that doesn’t mean you have to sacrifice big power for your system. Razor amplifiers pack huge power into small chassis thanks to efficient Full-Range Class D topology and SMT circuitry. Complimented with every possible preamp adjustment, the Razor amplifiers leave nothing to be desired. Are you using an original or factory radio? No problem, these amplifiers are equipped with an Automatic Hi-Level Signal Sensing Turn-On. There is no need to run a remote wire turn on; this amplifier will automatically detect the sound signal and turn on and off the amplifier. Razor Series Monoblock Class D Car Amplifier. 4 ohms: 900 watts x 1 chan. 2 ohms: 1400 watts x 1 chan. 1 ohm: 2100 watts x 1 chan. Max power output: 3500 watts. MOSFET Power Supply w/ Audiophile Grade IRTM Transistors. LED power (green) and protect (red) indicators. Dash Mount Gain Control Module Included. 3-way protection circuitry (thermal, overload, and speaker short protection). Military Grade SMT PCB Maintains Dynamic Performance. Variable 12dB High Pass & Low Pass Crossovers. 10-50Hz Variable 12dB Subsonic Crossover. Dimensions: 4.75″ W x 12.25″ L x 1.625 H. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.
Power Acoustik SB1.5000D. 5,000 Watt SABER Series Monoblock Class D Car Amplifier with Wired Remote Bass Knob. COMES WITH 3 YEAR. Weighing-in featherweight, SABER amplifiers still pack a heavyweight punch. These contenders bulk-up with the latest in class D amplifier technology, fueling them to go the distance. Title challengers include single 2ch & 4ch upstarters & three 1-ohm stable monoblock underdogs. Don’t get caught on the ropes against these maulers, they are the pound-for-pound prizefighter in the main event. SABER Standard Features 1-ohm Stable High Efficiency Class D Monoblock Amplifier Compact 5.00 Chassis Design for Installation Versatility MOSFET Power Supply w/ Audiophile Grade IRTM Transistors Military Grade SMT PCB Maintains Dynamic Performance Direct Short, Thermal, & Overload Circuits Protect Amplifier Variable 12dB/Octave Low Pass, & Subsonic Crossovers 200mV-6V Low Level RCA Inputs High Level Input w/ Signal Sense Auto Turn-on 8g Power Wire & 8g Speaker Wire Outputs 12dB Bass Boost Increases Low Octave Harmonics Dash Mount Gain Control Module Included. Saber Series Class D 1 ohms Stable Monoblock Amplifier. 4 ohms: 700 watts x 1 channel. 2 ohms: 1100 watts x 1 channel. 1 ohm: 1700 watts x 1 channel. Total RMS power output: 1700 watts. Compact 5 chassis design. Military Grade SMT PCB Maintains Dynamic Performance. MOSFET Power Supply w/ Audiophile Grade IRTM Transistors. Wired remote bass level control included. High Level Input w/ signal sense auto turn-on. 3-way protection circuitry (thermal, overload, and speaker short protection). Low level: 200mV – 6 volts. Variable low-pass filter: 35 – 250 Hz. Subsonic filter: 10 – 50 Hz. Variable Bass Boost: 0 – 12 dB. 8 AWG gauge power and ground wiring is recommended for installation. Our company has been in the stereo business for over 20 years. We will gladly answer any technical questions you have.