Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4

Posted by admin - Feb-16-2024
Crown_K2_Amplifier_nice_tested_1500wpc_2_3000w_Bridged_4_packaged_Well_4_01_wvx Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4

Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
This is an opportunity to own a good looking and nicely working Crown K2 stereo power amplifier. It powers on, passes audio, the selectors work, and the volume pots are not scratchy. It has been well taken care of in a pet free, smoke free, temperature controlled environment. It was never toured. It does have some rack rash, but that is the only thing to mention. It provides a total of 2500w (2x1250wpc) at 2 ohms or 1600w (2x800wpc) at 4 ohms. It provides 2500w bridged mono at 4 ohms. It will be a great piece for someone. You get exactly what you see pictured. It weighs 38 lbs. Here are the specs and what Crown has to say about this great amplifier. 2 ohm Stereo (per channel) 1,250W. 4 ohm Bridge-Mono 2,500W 800W. 4 ohm Stereo (per channel) 800W. Voltage Gain 32.88 dB gain at 1.4 volt sensitivity; 25 dB gain at 3.0 volt sensitivity. Frequency Response: ±0.25 dB from 20 Hz to 20 kHz. Signal to Noise (A-weighted): > 100 dB below rated power. Damping Factor: > 3,000 from 10 to 400 Hz. Input Impedance: Nominally 20 k ohms, balanced. Nominally 10 k ohms, unbalanced. Dims 19″x3.5″x16. Accurate, uncolored sound with very low distortion for the best in music and voice reproduction. High damping factor for tight, clean bass response. Advanced design for energy conservation. Mono mode switches allow you to set up your amps/speakers in the confi guration that best suits your needs-with combined amp inputs, combined amp outputs, or both. Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. Exclusive BCA® (Balanced Current Amplifier) power design provides super efficiency for quiet, fan-free operation. Switchable input sensitivity. “Soft start” feature prevents the K-Series amplifier from drawing large currents when it is fi rst turned on so you don’t need to delay power-on of your amps. Uniquely molded, cast-aluminum front panel provides exceptional air circulation for your KSeries amplifier. K -Series amplifiers deliver more power and sound while using less energy than conventional amplifiers. And it’s all in a durable, maintenance-free package that’s just two rack spaces high. Using patented Balanced Current Amplifi er (BCA®) circuitry, Crown® K-Series amplifiers give you massive amounts of power while generating just one-tenth the heat of conventional amplifiers. In fact, the powerful K2® amplifier can deliver an amazing 1,250 watts per channel into 2 ohms (and that’s a very solid 2 ohms)! Because of their incredible effIciency, K-Series amplifiers require no internal cooling fan and feature a closed chassis. Of course, no fan means no fan noise. In addition, the closed chassis makes these amplifiers virtually immune to environmental problems such as dust, cigarette smoke, stage fog and spilled liquids. In practical, everyday terms, the K-Series amplifiers are essentially maintenance-free. As with all convection-cooled amplifiers, varying operating levels and loads may require additional air movement in high ambient temperature conditions. K-Series amplifiers are so energy efficient- more than twice that of conventional switching amps-they require signifi cantly less energy to deliver their massive power into virtually any load, no matter how difficult. In addition, each amplifier is equipped with a “green” circuit that further reduces energy use during idle periods. Energy draw is so low-only 12 watts or less-the amplifier may be kept in a continual ready state at minimal cost. This efficiency means you’ll realize significant savings over the life of the amplifier, reducing the cost of ownership, as well as enabling more K-Series amplifiers to be plugged into a single AC circuit, reducing installation costs. I used a high resolution camera to give you accurate pictures of its condition. I have years of experience packaging delicate electronics, so rest assured, this will be packaged very well. I also use high quality packaging materials. Also, please check out the other items in my store. Thank you for looking and God bless!
Crown K2 Amplifier-nice-tested-1500wpc@2? /3000w Bridged@4? -packaged Well! #4
In:
Comments are Closed on this Post