Works voltage: AC115V or 230V for choose. Output power: 80W +80W at 8ohm load. THD+N=0.001%-0.03%(20HZ-20KHZ 5W-30W 8OHM Audio Precision 2 TEST). Size: Machine size: W:430mm D: 300mm H:70mm (excluding machine feet and various protruding positions). Package weight: about 8.5kg. Use ON MJ15024 power transistors, one pair of transistors each channel. With independent protection circuit. Use 200W copper Toroid transformer Output power per channel: 80W at 8 ohms Base On the famouse NAP250 power amplifier circuit. Material: Full aluminum chassis. Full aluminum feets + knobs. Tai Wan Gold-plated RCA+ Speaker posts. High current stainless steel switch. The high-power signal line in the machine uses UK copper wire, and the small signal line uses Japan’s CANARE. Package include: amplifier X 1. (NO IEC type mains power lead included). (please see the detail describe)[In case of DOA (Dead on Arrival), please report within 3 days].
We have an excellent condition and low hours ATI Signature Series 2 channel power amplifier. Hand built in the States and rated at 200 watts RMS per channel into 8 ohms. The weight of this amplifier is 51 pounds. The amplifier is working as it should and sounds great. The cosmetic condition is very good with just a couple small marks showing use. Included is the original 20amp rated power cable as well as the original box.
Audio input: stereo RCA. Audio output: banana speaker jacks. Frequency range: 16HZ-25KHZ (+/- 3dB). Signal to noise ratio: >115dB. Rated output power: 10W2 (Class A). Output impedance: 4? – 8? Working voltage: AC 100V(115V) / 220V(235V) 50-60Hz. Dimensions(LHW): 300 x 90 x 212mm.
MA5000PM Power Amplifier HIFI Class Pure Class A High Power Amplifier Home Amp 120W×2. Features: – MA-5000PM power amplifier parameter details: – Pure Class A rated continuous average output power: 120W+120W (8?) – Total Harmonic Distortion: 0.05%(2? Load);0.02%(4-16? Load) – Intermodulation Distortion: 0.01% Frequency characteristics: – Rated continuous average output: 20-20KHz (+0, -0.2dB) – Output power is 1W: 0.5-160KHz (+0, -3dB) – Damping coefficient: 1000(8? Load, 50Hz) – Input impedance: Average input: 40K? ; RCA input: 20K? – Gain power: 28dB – Signal-to-noise ratio: 122dB – Load impedance: 2-16? – Power Requirements: AC220V 50-60Hz – Static power consumption. Usually it cost about 35USD-50USD. Thanks for your understanding. If you receive defective item, please kindly notify us within 14 days.
Audio input: stereo L/R RCA. Audio output: banana speaker jacks. Rated output power: 10W+10W (Class A). Total harmonic distortion: 0.003%. Working voltage: AC 115V / 230V.
The world-famous PASS brand is well known in the audio industry. The sound is very good. The designer Nelson Pass also released the line and made it for many fans. Aleph 3 is one of them. A series is the most famous PASS amplifier, the sound is warm, transparent, soft and very comfortable. Aleph 3: The power is 30W, suitable for use in environments where the space is not very large, suitable for speakers under 8 inches. Don’t underestimate this 30W, It is not worse than those random marks of a few hundred watts. Pass Labs Aleph 3 amplifier line. The power transistor adopts the new original IRFP250 (precision matched). Original NIPPON CHEMI-CON Capacitors Array Power Supply. With Perfect speaker protection function. Pure copper signal input and output terminals made in Taiwan. 300W Advanced Oxygen Free Copper Wire Toroid transformer. All aluminum chassis + high current stainless steel switch. Input voltage: AC 115V or 230V. Output Power: Max 30W at 8ohm load. Input: RCA and XLR. Package weight: About 7.5 KG. PASS A3 Pure Class A Power amplifier X1. NOTE: We do not provide any cables.
Douk Audio HiFi Pure Class A Power Amplifier Home Stereo Single-ended Amp 15Wx2.
The world-famous PASS brand is well known in the audio industry. The sound is very good. The designer Nelson Pass also released the line and made it for many fans. Aleph 3 is one of them. A series is the most famous PASS amplifier, the sound is warm, transparent, soft and very comfortable. Aleph 3: The power is 30W, suitable for use in environments where the space is not very large, suitable for speakers under 8 inches. Don’t underestimate this 30W, It is not worse than those random marks of a few hundred watts. Pass Labs Aleph 3 amplifier line. The power transistor adopts the new original IRFP250 (precision matched). Original NIPPON CHEMI-CON Capacitors Array Power Supply. With Perfect speaker protection function. Pure copper signal input and output terminals made in Taiwan. 300W Advanced Oxygen Free Copper Wire Toroid transformer. All aluminum chassis + high current stainless steel switch. Input voltage: AC 115V or 230V. Output Power: Max 30W at 8ohm load. Input: RCA and XLR. Package weight: About 7.5 KG. PASS A3 Pure Class A Power amplifier X1. NOTE: We do not provide any cables.
This machine adopts the famous A5 single-ended class A power amp circuit, the original machine more than 20,000 US dollars! The circuit board wiring is reasonable! Use Hiend the Resistors. The sound is transparent and clear, the sound bottom is clean and neat, the level is good, the low frequency dives well, and the high frequency has penetrating power. The power Transistor adopts the new IRFP240 high-power field effect Transistor of the American IRF company, 6pcs per channel, and the static current of each channel reaches 2A! Each channel is powered by an independent power supply circuit, which is composed of 12pcs Nover Audio grade Gold letter 10000U/50V electrolytics and imported non-inductive resistors for CRC filtering. The total filter capacitor capacity of the two channels reaches 240,000 UF! The transformer uses 2pcs 300W high-quality toroidal transformer A-grade silicon steel to be wound into a no-break! (Pure Copper wire) The AC winding of each channel is independently powered, providing a strong power reserve for the Power amp stage. This amplifier with perfect speaker protection circuit. It can protect your expensive speaker from the impact sound when power on /off. Input voltage: AC 115V or 230V for choose. We also can custom make 100V or 240V. ? Output power: 60W +60W /8ohm, 90W +90W /4 ohm? Channel: 2 channel. Freq Response -0.5dB at 2 Hz, -2 dB at 100KHz. Input lmpedance 10 Kohm unbalanced. 25 Kohm balanced differential. Damping factor : 50 nominal. Output Noise: 600uV unweighted. Power Consumption : 300 watts? Support signal input: RCA single-ended input or XLR balanced input? Size: 360mm195mm396mm (WHD)? Package Weight: about 31KG. Package include: Power amplifier X1. Please read following carefully before purchasing. 1: the package are not include the power cord. Buyers need to prepare the Power cable by themselves!! 2: This amp front Round meter is not a VU meter. The pointer will not swing with the rhythm of music… It is just a Power voltage meter. Only a small Red LED in the centre. As this amp very heavey. In order that you can receive a stable and reliable machine. We will let it working about one week time then send it to you. If you don’t want pay any. Please don’t place order! 5: this amp are not accept return, Except for the quality problem. If your country are not see in this list Transportable range.
This Hood 1969 Power amp The architecture itself is not tube. But because of the single-ended output mode. Its harmonic distortion is very low. And work in the class A state. Although the power is not big. But used in the room to push the bookshelf speakers. The music is very strong. It is a good choice to replace tube amps Works voltage: AC230V and AC115V optional Frequency range: 15HZ-30KZH (+/-3dB). Signal to noise ratio >115dB. Impedance range: 4-8 ohm. Input terminal: RCA socket. Weight: about 6.5kg. 1:130W A-core non-segment toroidal transformer, oxygen-free copper wire. Low magnetic flux leakage. Full of power 2: Siemens high current high-side filter capacitor. The output capacitor uses the famous German ROE gold bomb. A strong sense of music 3: Pure copper input and output terminals. Resistant to oxidation, long-lasting new. 4: Japan ALPS 27 sealed volume potentiometer. Feel life First-class precision. 5: CNC all aluminum chassis. Finished HD1969 Class A Power amplifier X 1 Default is not include the AC input cable.